StepSaver Systems: Glass Funnels
| Item No. | Description | Price |
|---|---|---|
| G1101 | StepSaver System, 1-Station, Glass Funnel, PVC,ea | $1,300.00 |
| G1103 | StepSaver System, 3-Station, Glass Funnel, PVC, ea | $3,056.00 |
| G1107 | StepSaver System, 7-Station, Glass Funnel, PVC, ea | $5,818.00 |
| G2101 | StepSaver System, 1-Station, Glass Funnel, SS, ea | $1,605.00 |
| G2103 | StepSaver System, 3-Station, Glass Funnel, SS, ea | $3,548.00 |
| G2106 | StepSaver System, 6-Station, Glass Funnel, SS, ea | $5,649.00 |
EQUIPMENT
- Specified Manifold
- Specified Number of Extraction Stations: Each station comes with:
- 1 1000mL Glass Funnel (G1017)
- 1 Extraction Head with 40/35 Ground Glass Joint (G1020)
- 1 120° 2-way Teflon Stopcock (G1025)
- 1 Stainless Steel Filter Screen (G1030)
- 1 Flourosilicone Sealing Gasket (G3030)
- 1 Aluminum Clamp (G1055)
- 1 Keck Clip (G1050)
- 2 100mL Borosilicate Glass Collection Flasks (G1045)
- 1 20-Liter HDPE Waste Carboy with Tubing and Fittings (G3070)*
*Single station systems receive a 4-liter HDPE Water Carboy with Tubing and Fittings (G3064)
CONSUMABLES/ACCESSORIES
- 2 Boxes of 20 47mm UltraFlow Filters (G5047MM)
- 1 Pack of 50 Sodium Sulfate Drying Cartridges (G1065)
- 1 Box of 20 x 10mL 40mg HEM Snip and Pour Standards (G3025)
- 1 Box of 20 x 10mL 7 mg HEM MDL Snip and Pour Standards(G3023)
- 1 SPE Made Easy Video (G1001)
Question/Answer
If I use the G-1101 step saver system, will i need the hexane, acetone and sodium sulfate to run EPA 1664 A?
The StepSaver system is for using solid phase extraction (SPE) to determine Oil and Grease. The extraction solvent is n-hexane as required by the EPA. Once extracted, the solvent is passed through a sodium sulfate cartridge to remove any residual water. The only use for acetone is to make the 40 mg/L hexadecane/stearic acid standard, however this can be avoided by using G3025 or G3020 prepared standards. SPE does require activation of the disc, which is accomplished by the use of methanol. To see the StepSaver in use and learn more about its advantages please watch the StepSaver video here. http://www.envexp.com/video
I would like to replace the teflon stopcocks on my StepSaver 7-station PVC manifold - is it possible to order these without replacing the manifold & if so, what is the part number?
Yes, these can be replaced without replacing the entire manifold. This is not just the stopcock, but the body holding the stopcock. It is detachable from the manifold below and the joint above. The item # is G4015.