/*

SimpleDist Manifold Kit

* SimpleDist Manifold Kit

Turn your existing HotBlock into a SimpleDist. Stainless Steel Manifold Kits come with everything you need. The 12-Place kit can be used with the SC100 and the 18-Place kit for the SC154.

Don't forget we also carry equipment and supplies for TKN Digestions.


Item No. Description
C6200 SimpleDist - 18-Place Manifold Kit w/out Block
C6210 SimpleDist - 12-Place Manifold Kit w/out Block
G3050 1/8 HP Vacuum Pump 25.5" Hg, 115VAC

Question/Answer

We need a manual or instructions to set up C6200 SimpleDist.

The manual is available at http://www.envexp.com/product-manuals. The document is titled \"SimpleDist System Manual 08.2016.pdf\"

How much water vapour gas and sample mist gets past membrane into collector over 1 hour? How easy to adjust bubble rate on all 18 evenly? Price C6200package and components separate? Price G3050?

The full amount of distilled analyte should transfer from the boiling tube into the collection trap. How much volume that is will depend on the analyte and how much is present. Very little water vapor should pass through the frit. We expect 1-2 mL. You should use use a concentrated trapping solution that when diluted to 25 mL with DI water is the appropriate end concentration.

Can you fit two of these 12 valve manifolds on the 36 well block?

Yes, two of the 12-place manifolds will comfortably fit on opposite sides of a 36-well block.

What is the dimensions of the manifold? Do I need a seperate vacuum pump for this setup?

The dimensions of this manifold are 22.5 in. wide by 23.75 in. tall. This manifold does require a vacuum pump to operate.

What is the dimensions of the manifold? Do I need a seperate vacuum pump for this setup?

The dimensions of this manifold are 25.125 in. wide by 23.75 in. tall. This manifold does require a vacuum pump to operate.

Can you fit 2 manifolds on a 36-place hot block?

Yes, two of these manifolds will fit around the 36-place block (SC100)

amount vacumm do you need to connect to manifold for 50 ml hotblock

There is no specified vacuum for the SimpleDist system. Each individual station will be adjusted to give the appropriate rate of bubbling for the distillation to be complete. Generally speaking, a pump capable of providing 25.5\" Hg will be sufficient for the system.

what would the time of the distillation collection process be. at what temperature does the hot block get set to?

The HotBlock is set to a temperature of 135 C. Once the block reaches temperature distillation continues for one hour.

Click on an item to see additional information or ask a question.